Set of 2 terracotta velvet chairs for a 67.3 cm island

Sold in sets of 2, the Esmée kitchen island chairs combine a curved, moulded walnut-finish wood backrest with terracotta velvet upholstery and a matt black metal frame. Made from thin layers of wood glued together under pressure, this curve extends into the armrests. The velvet is 100% polyester, a fibre that holds its colour in the light.

At 67.3 cm from the floor, the seat is designed for use with a 92 to 97 cm-high island. Measuring 46 cm wide, it is padded with 24 kg/m³ foam, soft and more yielding than firm. The lower crossbar serves as a footrest, and the frame supports up to 120 kg.

Our interior design expert’s inspiration: terracotta warms up a light stone worktop, with a matt splashback rather than glossy tiles; around the table, pair it with the same off-white velvet as the Esmée chairs. Discover the full Esmée collection: khaki green velvet, off-white velvet, white bouclé fabric and leopard-print fabric, available as dining chairs and island chairs.

Color note: the actual shade may vary slightly depending on screen settings, photo lighting, and the natural variations of the materials.

Length: 55.5 cm
Depth: 52.5 cm
Height: 92 cm

Seat height: 67.3 cm
Seat: 46 x 43 cm

Weight: 7.5 kg

Recyclability: Mostly recyclable

Materials: Velvet seat (100% polyester), foam padded
Wraparound backrest with armrests, curved plywood with walnut finish
Metal frame and legs, matte black painted finish

Information: Maximum supported weight: 120 kg
Foam density: 24 kg/m³
To choose the right seat height, allow approximately 25–30 cm between the seat and the table.

Stackable: No

Foldable: No

Use: Indoor

Contents:

Pack of 2

Assembly: Flat-pack furniture - Download notice

Package information: 105 x 58 x 37 cm

Reference: 001-4857-OR

Collection : Esmée

Vacuum the velvet regularly with a soft brush, following the direction of the pile. If a stain appears, dab without rubbing with a clean cloth soaked in lukewarm water and very diluted Marseille soap, working from the outside in. Then leave to air-dry before brushing when dry to restore volume to the fibres. Avoid alcohol, bleach, harsh stain removers and excess water.
For the walnut-finished wooden backrest and armrests, as well as the metal legs, a dry microfibre cloth is sufficient; remove marks with a barely damp cloth and dry immediately to prevent water marks. Keep the chair away from prolonged humidity and direct heat sources.